Scientists at Sree Chitra Tirunal Institute for Medical Sciences and Technology (SCTIMST), Trivandrum, Kerala have designed a disinfection gateway and a UV based facemask disposal bin to fight COVID-19 pandemic. SCTIMST is an autonomous institute under the Department of Science and Technology (DST), Government of India.
Chitra Disinfection Gateway is one of the two technology designed by SCTIMST scientists Jithin Krishan and Subash VV from the Division of Medical Instrumentation for the decontamination of people, one at a time. It is a portable system equipped with a system for generating Hydrogen peroxide mist and UV based decontamination facility.
Hydrogen-peroxide fumes will decontaminate the body, hands, and clothes of a person. The UV system will decontaminate the chamber. The whole system is electronically controlled. The sensors mounted in the chamber will detect the entry of a person and start the hydrogen peroxide mist generation process. The person is required to walk through the chamber to its end. When the person exits, the system will shut off the hydrogen peroxide fumigation system and will turn on the UV lamp inside the chamber to decontaminate it. After the UV light is switched off automatically after a prescribed time, the chamber is ready for the next person. The whole process takes only 40 seconds. The system has see-through glass panels on sidewalls for monitoring and is fitted with lights for illumination during use.
The second technology, Chitra UV Based Facemask Disposal Bin, designed by Subash VV from SCTIMST, can be used by health workers in hospitals and in public places where decontamination of used facemask, overhead covers, face shields, and so on are required to break the infection chain.
Face masks are a must-have item due to the current Covid-19 outbreak, but the used masks are hazardous waste and must be disposed of properly. The waste collectors are at risk of being exposed to COVID19 while performing their duties. Instead of just throwing used face masks into the waste bin, disinfecting the used mask is a must.
“The design and Know-how have been transferred to HMT Machine Tools, Ernakulam, Kerala,” said DST.
