nice Neotech Medical Systems launches Unique Features and Benefits

nice 8010 Respiratory Humidifier

• Capable of operating in  non invasive control mode with low, medium & High temperature setting.
• It can be used for invasive ventilation, non invasive ventilation and oxygen therapy.

Infant Care

• Capable of operating in  non invasive control mode with low, medium & High temperature setting.
• It can be used for Infant Bubble CPAP,  Resuscitation, and Oxygen therapy.

Reusable Paediatric/Neonatal Humidifier Chamber

• Autoclavable low compressible volume humidifying chamber.
• Chamber compressible Volume for high flow 360 ml.
• Maximum water capacity 230 ml.
– 360 deg viewable water line for ease to monitor the water level from all angles.
• Highly durable intended for multiple usages.
• Gas Sterilization up to 218ºC.
• Water fill port for refilling water during operation.
• Biocompatible material minimizes risk on patient with safer material.
• Burnfree design minimizes risk of accidental burn.

Adult Care

• Capable of operating in either invasive or non invasive control mode with flow detection.
• It can be used for invasive ventilation, non invasive ventilation and oxygen therapy.

Infant Care

• Capable of operating in either invasive and non invasive control mode with flow detection. • It can be used for invasive ventilation, Infant  Bubble CPAP,  Resuscitation, and Oxygen therapy.

Reusable Adult Humidifier Chamber

• Autoclavable humidifying chamber with peak flow bypass.
• Chamber compressible Volume for high flow 700ml.
• Maximum water capacity 280 ml.
• 360 deg viewable water line for ease to monitor the water level from all angles.
• Highly durable intended for multiple usages.
• Gas Sterilization up to  218º C.
• Water fill port for refilling water during operation.
• Biocompatible material minimizes risk on patient with safer material.
• Burnfree design minimizes risk of accidental burn.

Features:

• Designed for use in hospital environment wherever medical gas is being supplied to patients, nice 8050 & nice 8010 heated wire humidifier incorporates latest technology that provides Physiological level of humidity at body temperature.
• The nice 8050 features dual servo control feedback system, incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rainout and waste are reduced, while the need for circuit change is minimized.
• Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set temperature Vs actual.
• The design of nice 8050 & nice 8010 makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator & Oxygen Therapy for Adult, Paediatric & Neonatal care. The nice 8050 & nice 8010 accommodates both high and low flow ventilation therapies, as well as heated and non heated wire breathing system.

The nice 8050 & 8010 delivers precise, reliable performance. An advanced microprocessor controller assures the control of the system. The system responds immediately to any change in settings, and constant self diagnostic verify proper operation every second of use. High and low temperature protection is assured through out operation, including warmup and setting changes. if the delivery temperature exceed 41°C independent circuitry shutdown all heating elements.

Provides essential equipment for safe and easy delivery of Neonatal CPAP

• Optimise   lung  protection and breathing support.

Continuous Positive Airway Pressure (CPAP) supports  infant breathing by providing respiratory support throughout the respiratory cycle. OxyPAP maintains the infant’s functional residual capacity  by helping  to prevent airway closure. CPAP promotes  gas exchange in the alveoli, which acts to enhance airway  patency, improve  lung volume recruitment and maintain infant  energy  reserves,  without the complications associated with endotracheal intubation.

Optimal   humidity    (37°c, 44mg/L) with CPAP is vital to support an infant’s breathing and protect its developing lungs. Optimal humidity  protects the lungs to optimise outcomes  for the  infant  by minimising airway drying, improving  secretion clearance, reduce airway constriction.

Features:

• Safe and reliable.

The Unique  Bubble CPAP generators  provides consistent and accurate delivery of CPAP. The Reusable Pressure Manifold with pressure relief valve for infant safety. The manometer is provided to ensure  the delivery  of accurate PEEP. Rotating PEEP  adjustment Knob to prevent the use error of setting the PEEP. Servo control  humidifier with temperature  indication with heater wire  for  humidity  of delivered gas.

• Easy to use:

Easy to adjust the PEEP setting on the  Bubble  CPAP generator. Easy to set modes of humidifier. Easy  to fix the nasal  prong  with  the neonates.

• Optimum humidification:

The Bubble CPAP system provides respiratory supports with body temperature  saturated gas to the  infant. Optimal humidity promotes  mucociliary clearance and reduces the work of breathing.

• Infant  nasal prongs:

Contoured nasal prongs made  from nonreactive silicone along with a unique cannula  body  provides stability during    therapy.  The   integrated pressure monitoring line allows the monitoring of nasal prong pressure without having lines near  the infant’s face offered in seven different sizes, it can be used on a wide range of patients from premature  to new born baby.

• Bubble generator:

Bubble generator provides a convenient means  to apply positive airway pressure, freeing the  clinician  to focus  on patient care,  not  the  device. This design delivers accuracy and  stability throughout the course  of therapy.

The  ergonomic design  allows airways  pressure to be easily set without the cumbersome  time  consuming tasks normally  associated with bubble devices.

Water feeding port  allows water to be added or removed by disconnecting the expiratory circuit. Minimum and maximum lines clearly visible in highly transparent jar with overflow container.

Credit: www.niceneotech.com